App / Slots
Cricket Stats Hub is the cricket section inside the 1111bettv sportsbook. Open your account to see the live data board and check what published stats are available in the signed-in area. Open your account to see the full data board and check where published stats sit inside the signed-in area.
Cricket Stats Hub is a dedicated statistics layer inside the 1111bettv sports section, built around the match formats that Bangladesh followers care about most — Test, T20 and ODI.
Each stat category inside Cricket Stats Hub has its own display logic. Here is what you will find in the four main areas when you open a live cricket market on a supported device.
The scorecard tab breaks innings into over-by-over blocks. Run rates, boundaries and wicket events are listed in sequence. On mobile, the card collapses to a summary row and expands on tap, keeping the screen uncluttered while the match is live.
Individual batting and bowling records appear inside each match card. Figures shown are limited to the current match context — career aggregates are not mixed in. Check the label at the top of each panel to confirm whether figures are match-total or innings-specific.
A short comparative block shows previous results between the two sides in the same format — T20 vs T20, ODI vs ODI. The number of matches displayed depends on what the data feed supplies; count and date range are printed at the foot of the block.
The run-rate line updates ball by ball during a live innings. Required run rate for the chasing side appears alongside it. Both figures disappear when an innings closes and reset for the next. The tracker is visible on both browser and mobile without any extra steps.
Cricket Stats Hub does not carry RTP values in the way a slot title does — it is a data and analytics layer, not a random-outcome game engine.
Every stats panel inside Cricket Stats Hub carries a source tag at the foot. That tag names where the figures originate. If you see a discrepancy between the hub and a broadcast feed, the source label is the first place to reference before contacting support.
Live match data refreshes are tied to the data feed contract, not a fixed-second interval. The refresh cadence is noted inside the panel. Delays during extended rain breaks or DRS reviews may cause a brief lag — the panel flags this with a stale-data indicator.
Cricket Stats Hub loads on any current mobile browser without a separate download. On desktop, the full panel layout is visible. On smaller screens the same data appears in a collapsed accordion that you expand by tapping each stat category row.
The terms that govern how Cricket Stats Hub data is used in settling betting markets are listed inside the sportsbook terms section of your signed-in account. Navigate to Account, then Terms, then Sportsbook to read the precise settlement rules for stat-dependent markets.
If you run into a data gap, a panel that will not load or a stat that looks out of step with the live broadcast, the support routes below are the published channels.
Open the chat icon from your signed-in account page. Describe which match, which stat panel and what the display shows versus what you expected. The agent can check the data feed status on their side and confirm whether a refresh is pending or a correction has been flagged.
For non-urgent stat queries or to report a recurring data issue across multiple matches, the published support email is listed on the Contact page inside your account. Include the match ID shown at the top of the stats panel — that shortens the investigation time on both ends.
The Help Centre, reachable from the footer of any page, includes a Cricket Stats section covering common panel loading issues, how settlement interacts with live data and what to do when a stat appears incomplete. Check there first before raising a ticket.
Stat accuracy inside Cricket Stats Hub relies on the data feed, clear panel labelling and a published dispute route.
Each panel carries its data source name. That attribution stays visible whether you are on mobile or desktop, live or pre-match. You do not have to dig into settings to find where the numbers come from — it is printed at the foot of the card.
How Cricket Stats Hub data connects to market settlement is written in the sportsbook terms inside your account. The section spells out which stat triggers settlement, which format applies and what happens if data is delayed or incomplete at close of play.
If a settled market looks inconsistent with published stats, the dispute path starts in the Help Centre under Sportsbook Disputes. The process names the evidence you submit — match ID, stat panel screenshot, relevant time stamp — and describes the review steps from there.
Cricket Stats Hub sits inside the cricket category, not a separate app or a generic info page. You reach it from the sports lobby by selecting cricket and then the Stats tab on any match.
These terms appear inside Cricket Stats Hub panels and settlement communications. Each definition is written for how the term is used on this platform, not as a general cricket textbook entry.
Run rate is the average number of runs scored per over in the current innings. Cricket Stats Hub displays both the current run rate and the required run rate for the chasing team, updated ball by ball while the innings is live.
DLS stands for Duckworth-Lewis-Stern, the calculation used to revise targets in weather-affected matches. When the DLS label appears in Cricket Stats Hub, it means the stat figures and market targets are subject to that revised calculation rather than the original match total.
A session market covers runs scored within a defined block of play — typically a morning, afternoon or evening session. Cricket Stats Hub tracks session run totals separately from match totals, so the panel updates only for the active session block.
A stale data indicator appears on a Cricket Stats Hub panel when the live feed has not sent a confirmed update within the expected window. It alerts you that the figure displayed may not reflect the latest ball. Refresh the page or wait for the next feed push to clear it.
A match ID is the unique reference number assigned to each fixture inside the platform. It appears at the top of the stats panel and is the reference you use when raising a settlement query or support ticket related to that specific match.
Head-to-head in Cricket Stats Hub filters historical results to the same match format — T20 against T20, for example. It does not mix formats, so the comparison stays relevant to the market format you are betting on for that fixture.
These are the questions that come up most often from members using Cricket Stats Hub during live matches and pre-match research. Each answer points to the specific place inside the platform where you can verify the detail yourself.
Go to the sports section, select cricket from the category bar, then open any live match card. A Stats tab appears at the top of the match view alongside Markets and Scorecard.
Coverage depends on which matches are listed in the sports lobby at the time. BPL fixtures appear in the cricket category when they are scheduled and available for betting in supported regions.
Yes, published stats from the hub can support a settlement query. To raise one, go to Help Centre, then Sportsbook Disputes.
A blank panel usually means the data feed for that fixture has not started yet, or the match is between innings with no active session data to display.
Yes, the player performance panel covers both sides. You can switch between batting and bowling views using the tabs inside the panel.
Your account wallet and the cricket sports section are separate from each other. Funding your account through Nagad, Upay or Bank Transfer gives you an account balance to place bets — it does not restrict which parts of the sports section you can view.